It will break if not maintained.
If the motorcycle chain is not maintained for a long time, it will rust due to lack of oil and water, resulting in the inability to fully engage with the motorcycle chain plate, which will cause the chain to age, break, and fall off. If the chain is too loose, the transmission ratio and power transmission cannot be guaranteed. If the chain is too tight, it will easily wear and break. If the chain is too loose, it is best to go to the repair shop for inspection and replacement in time.
Motorcycle chain maintenance methods
The best way to clean a dirty chain is to use a chain cleaner. However, if engine oil causes clay-like dirt, it is also effective to use a penetrating lubricant that will not cause damage to the rubber sealing ring.
Chains that are pulled by torque when accelerating and pulled by reverse torque when decelerating are often continuously pulled with great force. Since the late 1970s, the emergence of oil-sealed chains, which seal lubricating oil between the pins and bushings inside the chain, has greatly improved the durability of the chain.
The emergence of oil-sealed chains has indeed increased the service life of the chain itself, but although there is lubricating oil between the pins and bushings inside the chain to help lubricate it, the chain plates sandwiched between the gear plate and the chain, between the chain and the bushings, and on both sides of the chain The rubber seals between the parts still need to be properly cleaned and oiled from the outside.
Although the maintenance time varies between different chain brands, the chain basically needs to be cleaned and oiled every 500km of driving. In addition, the chain also needs to be maintained after riding on rainy days.
There shouldn’t be any knights who think that even if they don’t add engine oil, the engine won’t break down. However, some people may think that because it’s an oil-sealed chain, it doesn’t matter if you ride it farther. By doing this, if the lubricant between the chainring and chain runs out, direct friction between the metal parts will cause wear.
Post time: Nov-23-2023