Pitch: 25.4mm, roller diameter: 15.88mm, customary name: inner width of link within 1 inch: 17.02.
There is no 26mm pitch in conventional chains, the closest one is 25.4mm (80 or 16B chain, maybe 2040 double pitch chain).
However, the outer diameter of the rollers of these two chains is not 5mm, so please confirm again. If the measurement is correct, then this chain is not a product for normal use.
Extended information:
The chain pitch of 16A is 25.4, the roller diameter is 15.88, the inner width of the inner section is 15.75, the pin diameter is 7.94, and the row pitch is 29.29. It is only necessary to determine the number of sprocket teeth according to the transmission ratio. The model is equipped with 16A.
The small-diameter end surface of the outer link plate connector is coaxially fixedly connected to the end surface of the pin shaft; two ends of the outer link plate are symmetrically provided with connecting holes, and the connecting holes are in the form of a circular truncated structure.
The side of the outer chain plate connector is fixedly connected with the side of the connecting hole. The inner wall surface of the roller in the wear-resistant roller chain of the patented technology of the utility model has a curved surface structure, which increases the friction area between the roller and the sleeve, thereby improving the wear resistance of the chain and increasing the service life of the chain.
Post time: Aug-31-2023