News
-
How to install the bicycle chain if it falls off?
If the bicycle chain falls off, you only need to hang the chain on the gear with your hands, and then shake the pedals to achieve it. The specific operation steps are as follows: 1. First place the chain on the upper part of the rear wheel. 2. Smooth the chain so that the two are fully engaged. 3...Read more -
How is the model of the chain specified?
The model of the chain is specified according to the thickness and hardness of the chain plate. Chains are generally metal links or rings, mostly used for mechanical transmission and traction. A chain-like structure used to obstruct the passage of traffic, such as in a street or at the entrance t...Read more -
What does sprocket or chain representation method 10A-1 mean?
10A is the chain model, 1 means single row, and the roller chain is divided into two series: A and B. The A series is the size specification that conforms to the American chain standard: the B series is the size specification that meets the European (mainly the UK) chain standard. Except for the ...Read more -
What does chain 16A-1-60l mean
It is a single-row roller chain, which is a chain with only one row of rollers, where 1 means a single-row chain, 16A (A is generally produced in the United States) is the chain model, and the number 60 means that the chain has a total of 60 links. The price of imported chains is higher than that...Read more -
What’s the matter with the motorcycle chain becoming very loose and not tight?
The reason why the motorcycle chain becomes extremely loose and cannot be adjusted tightly is because Long-term high-speed chain rotation, due to the pulling force of the transmission force and the friction between itself and dust, etc., the chain and gears are worn, causing the gap to increase a...Read more -
Why does the motorcycle chain always loosen?
When starting with a heavy load, the oil clutch does not cooperate well, so the chain of the motorcycle will loosen. Make timely adjustments to keep the tightness of the motorcycle chain at 15mm to 20mm. Check the buffer bearing frequently and add grease on time. Because the bearing has a harsh w...Read more -
The motorcycle chain is loose, how to adjust it?
1. Make timely adjustments to keep the tightness of the motorcycle chain at 15mm ~ 20mm. Check the buffer bearings frequently and add grease on time. Because the bearings work in a harsh environment, once the lubrication is lost, the bearings are likely to be damaged. Once damaged, it will cause ...Read more -
How to judge the tightness of motorcycle chain
How to check the tightness of a motorcycle chain: Use a screwdriver to pick up the middle part of the chain. If the jump is not large and the chain does not overlap, it means the tightness is appropriate. The tightness depends on the middle part of the chain when it is lifted. Most straddle bikes...Read more -
What is the standard of motorcycle chain tightness?
screwdriver to stir the chain vertically upward at the lowest point of the lower part of the chain. After the force is applied, the year-on-year displacement of the chain should be 15 to 25 millimeters (mm). How to adjust the chain tension: 1. Hold up the big ladder, and use a wrench to unscrew t...Read more -
Should motorcycle chains be loose or tight?
A chain that is too loose will fall off easily and a chain that is too tight will shorten its life. The correct tightness is to hold the middle part of the chain with your hand and allow a gap of two centimeters to move up and down. 1. Tightening the chain requires more power, but loosening the c...Read more -
How to choose a bicycle chain
The choice of bicycle chain should be selected from the size of the chain, the speed change performance and the length of the chain. Appearance inspection of the chain: 1. Whether the inner/outer chain pieces are deformed, cracked, or corroded; 2. Whether the pin is deformed or rotated, or embroi...Read more -
The invention of the roller chain
According to research, the application of chains in our country has a history of more than 3,000 years. In ancient times, the rollover trucks and waterwheels used in rural areas of my country to lift water from low places to high places were similar to modern conveyor chains. In the “Xinyix...Read more
