Each bearing consists of a pin and a bushing on which the chain’s rollers rotate. Both the pin and the bushing are case hardened to allow articulation together under high pressure and to withstand the pressure of loads transmitted through the rollers and the shock of engagement. Conveyor chains of various strengths have a range of different chain pitches: the minimum chain pitch depends on the requirement of sufficient strength for the sprocket teeth, while the maximum chain pitch is usually determined by the rigidity of the chain plates and the general chain, if The rated maximum chain pitch can be exceeded by strengthening the sleeves between the chain plates if required, but clearance must be left in the teeth to clear the sleeves.
Introduction to Conveyor Chain
It is suitable for the transportation of various boxes, bags, pallets and other pieces of goods. Bulk materials, small items or irregular items need to be transported on pallets or in turnover boxes. It can transport a single piece of material with a large weight, or withstand a large impact load.
Structural form: According to the driving mode, it can be divided into power roller line and non-power roller line. According to the layout form, it can be divided into horizontal conveying roller line, inclined conveying roller line and turning roller line. It can also be specially designed according to customer requirements.
structure type
1. Driving method
According to the driving mode, it can be divided into power drum line and non-power drum line.
2. Arrangement form
According to the layout form, it can be divided into horizontal conveying roller line, inclined conveying roller line and turning roller line. [
3. Customer requirements
Special design according to customer requirements to meet the requirements of various customers. The inner width of the standard drum is 200, 300, 400, 500, 1200mm, etc. Other special specifications can also be adopted according to customer needs. The standard turning inner radius of the turning drum line is 600, 900, 1200mm, etc., and other special specifications can also be adopted according to customer needs. The diameters of the straight rollers are 38, 50, 60, 76, 89mm, etc.
Post time: Mar-28-2023