When it comes to breaking roller chains, there are many different methods and tools that can be used. Whether you need to loosen your chain for maintenance or replace a damaged link, the process can be done quickly and easily with the right method. In this blog, we will learn a step by step guide to breaking a roller chain.
Step 1: Gather Your Tools
Before you start, you need to make sure you have the right tools on hand. Here’s what you need:
- Circuit breaker tool (also called chain breaker or chain breaker)
- A pair of pliers (preferably needle nose pliers)
- Slotted screwdriver
Step 2: Prepare the Chain
First, you need to find the part of the chain that needs to be broken. If you are using a brand new chain that has never been installed, skip to the next step.
If you are using an existing chain, you will need to remove all tension from the chain before proceeding. This can be done by placing the chain on a flat surface such as a workbench and using a pair of pliers to gently grip one of the links. Then, pull back on the pliers to loosen some slack in the chain.
Step 3: Break the Chain
Now that the chain is loose, you can break it. First use a flathead screwdriver to push out the retaining pin in the link to be removed. This will allow you to separate the two halves of the link.
After removing the retaining pin, place the breaker tool on the chain with the pin driver facing the link to be removed. Turn the pin driver until it engages the pin in the link, then push the handle of the breaker tool down to push the pin out of the link.
Repeat this process for any other links that need to be removed. If you need to remove more than one link, just repeat the steps above until you reach the desired length.
Step 4: Reconnect the chain
Once you’ve removed the desired portion of the chain, it’s time to reattach the chain. To do this, use the two halves of the links you separated earlier and place one half on each end of the chain.
Then, use the breaker tool to push the retaining pin back into place. Make sure the pin is fully seated in both halves of the link and doesn’t stick out of either side.
Finally, check the chain tension to make sure it’s not too loose or too tight. If adjustments are needed, you can use pliers to further clamp the link and loosen it, or remove another link if it is too tight.
in conclusion
Breaking a roller chain can seem like a daunting task, but with the right tools and a little guidance, it can be done quickly and easily. Following the steps above, you will be able to remove or replace any part of the chain in no time. Remember to wear gloves and goggles when working with chains, and always practice safe handling techniques to avoid injury.
Post time: May-11-2023