reason:
1. Poor quality, defective raw materials.
2. After long-term operation, there will be uneven wear and thinning between the links, and the fatigue resistance will be poor.
3. The chain is rusted and corroded to cause breakage
4. Too much oil, resulting in severe tooth jumping when riding vigorously.
5. The chain links are too tight and astringent, causing breakage.
Approach:
Generally, the car chain is broken halfway. If you have a chain breaker and a quick buckle, you can simply connect the broken chain back. Otherwise, you can only push it to the repair place for repair, or if you have prepared a good chain plug Tips, and some basic tools such as a hammer are barely acceptable, but they are particularly troublesome and time-consuming, and it is not recommended to repair them on the way.
First remove the entire broken chain, align the top rod of the chain breaker with the pin in the chain, then slowly fasten the chain breaker to remove the pin, and quickly buckle the chain with one front and one reverse Put it into the chain mesh at both ends, and then buckle the two ends, and the broken chain will be connected.
This can be done if you have the tools and materials. If you don’t prepare in advance, you can usually only push it to the repair place, and often get a hand of oil. Secondly, the general chain is broken, indicating that the aging is serious, it is best to replace the new chain as soon as possible.
Post time: Aug-30-2023