Yadda ake duba sarkar abin nadi

Duban gani na sarkar
1. Ko sarkar ciki/na waje ta lalace, ta fashe, an yi mata ado
2. Ko fil ɗin ya lalace ko ya juya, an yi masa ado
3. Ko abin nadi ya fashe, ya lalace ko ya wuce kima
4. Shin haɗin gwiwa yana kwance kuma ya lalace?
5. Ko akwai wani maras kyau sauti ko maras kyau vibration a lokacin aiki, da kuma ko sarkar lubrication yana da kyau yanayi.
Hanyar gwaji
Ya kamata a auna daidaito tsawon sarkar bisa ga buƙatu masu zuwa:
1. Ana tsaftace sarkar kafin aunawa
2. Kunna sarkar da aka gwada a kusa da sprockets guda biyu, kuma ɓangarorin sama da na ƙasa na sarkar da aka gwada ya kamata a tallafawa.
3. Sarkar kafin aunawa yakamata ya kasance na 1minti a ƙarƙashin yanayin amfani da kashi ɗaya bisa uku kuma mafi ƙarancin ƙarancin ƙarfi.
4. Lokacin aunawa, yi amfani da ƙayyadaddun nauyin ma'auni akan sarkar, don haka sarƙoƙi na sama da na ƙasa suna da ƙarfi, kuma sarkar da sprocket ya kamata su tabbatar da haƙori na al'ada.
5. Auna tsakiyar nisa tsakanin sprockets biyu

Don auna sarkar elongation:
1. Domin a cire wasan da dukan sarkar, ya kamata a auna a karkashin wani mataki na ja tashin hankali a kan sarkar.
2. Lokacin aunawa, don rage girman kuskure, auna a 6-10 knots
3. Auna girman L1 na ciki da na waje L2 tsakanin adadin rollers don samun girman hukunci L=(L1+L2)/2
4. Nemo tsayin tsayin sarkar.Ana kwatanta wannan ƙimar tare da ƙimar iyakar amfani da haɓakar sarkar a cikin abin da ya gabata.
Tsarin sarkar: wanda ya ƙunshi haɗin ciki da na waje.Ya ƙunshi ƙananan sassa biyar: farantin sarkar ciki, farantin sarkar waje, madaurin fil, hannun riga, da abin nadi.Ingancin sarkar ya dogara da ramin fil da hannun riga.

Saukewa: DSC00429


Lokacin aikawa: Agusta-29-2023